Motorsport Tools Home

Dynocom 5000 2wd Dyno

Due to retirement we are selling our DynoCom 2wd 5000 Series rolling road. Capable of 175 mph, 5000 ftlb of torque and 1250 bhp.
We are offering the dyno complete with all accessories,
~6 x 10,000lb ratchet straps.
~120 Inch alloy dynocom ramps with 8500 lb capacity.
~A/FM wide band Air fuel meter.
~Laptop DC handheld controller
~Optical pick up
With the aid of Dynocom's easy to use software, using this quality rolling road could not be easier. Simply strap the vehicle down to the rollers, take a couple of measurements, fill in the vehicle spec and and its good to go.
The 5000 can be floor mounted , hence saving you thousands on installation or pit mounted.

This is a superior quality USA manufactured rolling road, and is NOT to be confused with cheaper, European or Chinese machines.
Dynocom A/FM meter spec.
Dynocom'sDC A/FM is a wideband air fuel meter which also has an analog output that can output a linearized 0-5VDC signal to ECU's, DAQ's, gauges, and other dynamometer systems. The unit can use either the NTK or the Bosch wideband sensors. The DC A/FM comes complete with the following:
• NTK production grade sensor
• DC A/FM module with large, bright digital display controller (~3.4in x 2.7in x 1.3in)
• Stainless Steel O2 Bung
• Cigarette Adaptor
• 16 Foot High Quality Cable
• Defaults to Lambda can display AFR
• AFR supports gasoline and methanol fuel
•Two (2) analog output (range is 0.55 to 1.24 Lambda)
•Comprehensive Installation, troubleshooting and tuning manual
• Compatible with the following oxygen sensors: NTK 6mA, 4mA, and Bosch LSU4.2 and LSU4.9

Compatible Fuel Types:
• Gasoline / Petrol (leaded or unleaded)
• Alcohol (Methanol), Ethanol, Compressed Natural Gas (CNG), Liquefied Petroleum Gas (LPG) and Propane.

Dynocom Home page and dyno spec

The 5000 series is the world's best built 8.75 Inch cradle roll dynamometer. The 5000 Series dynamometer is capable of supporting speeds up to 175+ MPH and 5000+ ft lbs of torque. The maximum axle weight is 6,500 lbs and the track width range is 36"-86". The 5000 was designed for a variety of different testing scenarios – FWD/RWD Cars, Sport Compacts, Diesel Trucks, Motorcycles and ATV’s. With stainless steel coverings and zinc plated CNC knurled rollers this dyno is equipped to handle all of your company’s needs. Ideal for portability when equipped with the caster/dolly kit. Standard with integrated LED lighting, patented taper shaft design for the highest load and torque. Integrated cooling fans for the Frenelsa eddybrake which increases load testing time and cools the 2K load cell. Equipped with a Frenesla eddy brake and you are able to perform acceleration, step, sweep and steady-state tests. • View in real-time torque/horsepower output, at steady and changing speeds, to instantly evaluate changes you’ve made to the engine’s fuel or timing maps. • Diagnose engine and drivetrain problems. • Troubleshoot drivability issues. • Run track ¼ mile or circle track lap simulations with reaction times that you determine in the software parameters. • Bi-Directional roller for testing of both RWD and FWD vehicles. The 5000 Series is fully upgradeable in the field, it can be coupled with any other Dynocom Chassis Dynamometer (5000,7500, 15,000, or DC POD’s) for All-Wheel-Drive Testing.

With the support of its parent company with over 30 years of high-tech manufacturing experience, Dynocom has evolved into the fastest growing and technically advanced dynamometer company in the world.

This is a superior quality USA manufactured rolling road, and is NOT to be confused with cheaper, European or Chinese machines.

A/FM meter link
Optical pick up link
Handheld DC controller link

Pick up only forklift available for loading purposes

Please call or text on 07720641272 with any queries
We also have a Hoffman 4 tonne 2 post lift for sale £18,000 for both pieces.

Item is located in Corby , Northants NN17
Payment by Bank transfer, Cards both credit or debit No paypal please as paypal limit is £2500.
Full receipt/invoice, set up and software giving. On site tuition available at owners workshop.


Country: United Kingdom
Contact Tel No: 07720641272

Contact Seller

Back to Product Listing

Copyright © 2009-2015